Accessories
Categories
Card Reader Extension Cable, 10', for G8, G9, G10, and G11 - NOT FOR EDGE
This cable extends the current Card Reader serial cable by and additional 10 feet. This may be required when the Telemeter is not located within si...
View full detailsSerial Connector Cable for the MEI 3-in-1, 4-in-1 Bezel to connect to Step Down Power Supply for G10 Telemeter
This connector cable is necessary to connect the MEI 3-in-1 and 4-in-1 Combo Bezels to the G8, G9, and G10 Step Down Power Supply to connect to the...
View full detailsStep-down Power Supply Cable for G10
This serial cable is necessary to provide the interface when using a Coinco or MEI Combi Bezel with the G8 and G9 Controller as the Telemeter. The ...
View full detailsSerial Cable from Vendi or Vivotech card reader to the Telemeter
This item supports connecting the Vendi or Vivotech card reader which a 10 pin Molex connector that connects to a Telemeter which has a six pin Mol...
View full detailsDEX Cable Extender for all credit card reader devices - 10'
This cable extends the DEX Cable another ten feet whenever the DEX Port is too far away to support the standard six foot DEX Cable. This cable does...
View full detailsMDB Cable for credit card reader devices - 10'
This is a 10' MDB extension cable for use with any credit card reading device. This cable is used in machines when the device must be mounted in a...
View full detailsMDB Cable for credit card reader devices - 6'
This is a 6' MDB cable for use with any credit card reader device. It is used to connect to the Multi Drop Bus (MDB) of the vending equipment. For ...
View full detailsMDB Cable for credit card reader devices - 3'
This is a 3' MDB cable for use with any credit card reader device. It is used to connect to the Multi Drop Bus (MDB) of the vending equipment. For ...
View full detailsCable Assembly - Engage Reader MDB & DEX 120 in
This is an extension cable for the Engage reader (does not work with the Engage Combo). It extends BOTH the MDB and the DEX 10 additional feet. Ca...
View full details3’ MDB Extension Cable
Used When: Engage device is mounted more than 12” from MDB connection. Examples: HVV beverage machines where reader is mounted on the upper left ...
View full detailsDex Y Cable
Used When: If your driver’s process is to use his handheld to get a DEX reading at the time of servicing. The cable has an additional DEX port al...
View full detailsZero DEX Cable for Engage Combo Reader
Used When: This cable is required on all Vendo model beverage machines and All Automatic Product snack machines that still utilizes the factory...
View full detailsSerial Interface Cable for G10
This 36 inch cable that is used with the Serial device. The DB9 connector at one end connects to the serial port of a PC computer, and the 10 posi...
View full detailsZero Voltage Dex Cable
Used When: This cable is required on all Vendo model beverage machines and All Automatic Product snack machines that still utilizes the factory AP...
View full detailsCard Reader Extension Cable, 2', for G8, G9 and G10 - NOT FOR EDGE
This cable extends the current Card Reader serial cable by and additional 2 feet. This may be required when the Telemeter is not located within six...
View full detailsDEX 6" Short Stub Cable
The intent is to have this cable remain plugged into the credit card reader so that Route Driver can easily connect their handheld device when the ...
View full detailsSerial Cable from Vendi card reader to serial computer port
This item supports connecting the Vendi card reader which a 10 pin Molex connector, to the serial RS232, 9 pin D connector, of PC computer. Cantal...
View full detailsV6DUC0101217 DEX Y Cable for G11
DEX Y Cable for G11 card reader. Male DEX on one end with the panel mount female and red female DEX port.