Cables

This cable extends the current Card Reader serial cable by and additional 10 feet. This may be required when the Telemeter is not located within si...

This connector cable is necessary to connect the MEI 3-in-1 and 4-in-1 Combo Bezels to the G8, G9, and G10 Step Down Power Supply to connect to the...

This serial cable is necessary to provide the interface when using a Coinco or MEI Combi Bezel with the G8 and G9 Controller as the Telemeter. The ...

This item supports connecting the Vendi or Vivotech card reader which a 10 pin Molex connector that connects to a Telemeter which has a six pin Mol...

This cable extends the DEX Cable another ten feet whenever the DEX Port is too far away to support the standard six foot DEX Cable. This cable does...

This is a 10' MDB extension cable for use with any credit card reading device.  This cable is used in machines when the device must be mounted in a...

This is a 6' MDB cable for use with any credit card reader device. It is used to connect to the Multi Drop Bus (MDB) of the vending equipment. For ...

This is a 3' MDB cable for use with any credit card reader device. It is used to connect to the Multi Drop Bus (MDB) of the vending equipment. For ...

Used When: Engage device is mounted more than 12” from MDB connection. Examples: HVV beverage machines where reader is mounted on the upper left ...

This is an extension cable for the Engage reader (does not work with the Engage Combo).  It extends BOTH the MDB and the DEX 10 additional feet. Ca...

Used When: If your driver’s process is to use his handheld to get a DEX reading at the time of servicing. The cable has an additional DEX port al...

Used When: This cable is required on all Vendo model beverage machines and All Automatic Product snack machines that still utilizes the factory...

The intent is to have this cable remain plugged into the credit card reader so that Route Driver can easily connect their handheld device when the ...

This cable extends the current Card Reader serial cable by and additional 2 feet. This may be required when the Telemeter is not located within six...

This 36 inch cable that is used with the Serial device.  The DB9 connector at one end connects to the serial port of a PC computer, and the 10 posi...

Used When: This cable is required on all Vendo model beverage machines and All Automatic Product snack machines that still utilizes the factory AP...

This item supports connecting the Vendi card reader which a 10 pin Molex connector, to the serial RS232, 9 pin D connector, of PC computer.  Cantal...

DEX Y Cable for G11 card reader.  Male DEX on one end with the panel mount female and red female DEX port.