ePort Parts and Products

Used When: Engage device is mounted more than 12” from MDB connection. Examples: HVV beverage machines where reader is mounted on the upper left ...

The Audit Card is used to audit cash and cashless sales totals of a given machine. When this card is swiped in a credit card reader, the device is ...

This is an extension cable for the Engage reader (does not work with the Engage Combo).  It extends BOTH the MDB and the DEX 10 additional feet. Ca...

This kit will replace one of the selection buttons on the Dixie Narco High Visibility Vender (HVV) and allow the credit card reader System to be in...

This cable extends the current Card Reader serial cable by and additional 10 feet. This may be required when the Telemeter is not located within si...

This cable extends the DEX Cable another ten feet whenever the DEX Port is too far away to support the standard six foot DEX Cable. This cable does...

The Driver Card is used for fill-to-fill reporting. When filling a machine, a swipe of the driver card will create a “bookmark” in the system that ...

This Antenna was designed to help optimize signal for the Engage credit card reader in areas with low signal strength.  Cable length is 6.5' (2 met...

The Antenna Extension Assembly Kit allows the installation of the High Gain Antenna for G8, G9, and EDGE (8' cable and 4' cable versions) on machin...

This High Gain Antenna was designed to help optimize signal for the G10-S, G11 and Interactive in areas with low signal strength.  This has a MCX C...

This High Gain Antenna was designed to help optimize signal for the G10-S, G11 and  Interactive in areas with low signal strength.  This has a MCX ...

The High Gain Antenna was designed to help optimize signal for the G8, G9 and EDGE in areas with low signal strength. It requires a 7/16" hole for ...

The High Gain Antenna was designed to help optimize signal for the G8, G9 and EDGE in areas with low signal strength. It requires a 7/16" hole for ...

Flange plate is used for mounting the ID Tech card swipe to a machine. Part # VXXUE0101235

This is the bottom decal for the ID Tech card reader.   The top of the card reader requires another decal: https://store.cantaloupe.com/collections...

*Limited Stock This is the top decal for the ID Tech card reader.   The bottom of the card reader requires another decal: https://store.cantaloupe....

This interface kit will work with the G9, G10, and G11.  This interface kit is required for Coin Pulse installation to ease the installation proces...

This kit will replace the existing front cover when installing a credit card reading system when you need a second knockout. The current front cove...

This is a 10' MDB extension cable for use with any credit card reading device.  This cable is used in machines when the device must be mounted in a...

This is a 3' MDB cable for use with any credit card reader device. It is used to connect to the Multi Drop Bus (MDB) of the vending equipment. For ...

This is a 6' MDB cable for use with any credit card reader device. It is used to connect to the Multi Drop Bus (MDB) of the vending equipment. For ...

This flange plate is used for mounting the OTI card swipe to a machine. Part # V6XUE1520258

This is the decal for the OTI Saturn 6500 card reader.   Reference to Card Reader: https://store.cantaloupe.com/collections/eport-parts-and-product...

Available exclusively to Cantaloupe customers only. Each package contains 10 sheets of GO CASHLESS decals.  Each sheet has 3 unique decals for a to...