Products

Used When: Engage device is mounted more than 12” from MDB connection. Examples: HVV beverage machines where reader is mounted on the upper left ...

This is an extension cable for the ePort Engage reader (does not work with the ePort Engage Combo).  It extends BOTH the MDB and the DEX 10 additio...

This cable extends the current Card Reader serial cable by and additional 10 feet. This may be required when the ePort Telemeter is not located wit...

This cable extends the current Card Reader serial cable by and additional 2 feet. This may be required when the ePort Telemeter is not located with...

This cable extends the DEX Cable another ten feet whenever the DEX Port is too far away to support the standard six foot DEX Cable. This cable does...

Used When: If your driver’s process is to use his handheld to get a DEX reading at the time of servicing. The cable has an additional DEX port al...

Used When: This cable is required on all Vendo model beverage machines and All Automatic Product snack machines that still utilizes the factory...

This is a 10' MDB extension cable for use with any ePort device.  This cable is used in machines when the ePort device must be mounted in a positio...

This is a 3' MDB cable for use with any ePort device. It is used to connect ePorts to the Multi Drop Bus (MDB) of the vending equipment. For use wh...

This is a 6' MDB cable for use with any ePort device. It is used to connect ePorts to the Multi Drop Bus (MDB) of the vending equipment. For use wh...

This item supports connecting the Vendi card reader which a 10 pin Molex connector, to the serial RS232, 9 pin D connector, of PC computer.  Part #...

This item supports connecting the Vendi or Vivotech card reader which a 10 pin Molex connector that connects to an ePort Telemeter which has a six ...

This connector cable is necessary to connect the MEI 3-in-1 and 4-in-1 Combo Bezels to the ePort G8, G9, and G10 Step Down Power Supply to connect ...

This 36 inch cable that is used with the ePort Serial device.  The DB9 connector at one end connects to the serial port of a PC computer, and the 1...

This serial cable is necessary to provide the interface when using a Coinco or MEI Combi Bezel with the G8 and G9 Controller as the Telemeter. The ...

Used When: This cable is required on all Vendo model beverage machines and All Automatic Product snack machines that still utilizes the factory AP...